|
Bushes, by Part Number 9 May 2023 Bush, driving gear (ref only) REF Ref# 18 Fig. 33 Page 73 #7 (1969) (Req:1) Tach gear housing T120R-TR6R |
|
Bush, tach driven gear (ref only) REF Ref# 26 Fig. 33 Page 73 #7 (1969) (Req:1) Tach driven gear housing T120R-TR6R ¹ P/O 70-6122 Driven gear housing Ref.24 Fig.33 |
|
57- 57-0023 / T23 Bin - (0/1/0) Bush BoreD 0.751-0.752 Clearance .003-.005 Spring Len 1/2" Ref# 2 Fig. 9 Page 29 #7 (1969) (Req:1) Kickstarter spindle bush ¹ #7 reverses Ref# for 57-0043 & 57-0023 |
|
57-0057 / T57 Bin - (0/2/0) Bush BoreD 0.7495-.7505" Shaft clearance .0005-.0025" Ref# 3 Fig. 9 Page 29 #7 (1969) (Req:1) Gearchange quadrant (outer bush) ¹ #7 reverses Ref# for 57-0057 & 57-0023 |
|
57-0412 / T412 Bush BoreD 0.6245-.6255" Shaft clearance 0.0007-.0032" Ref# 15 Fig. 7 Page 25 #7 (1969) (Req:1) Gearchange quadrant (inner bush) |
|
57-0928 / T928 Bin K-4 (1/1/0) Bush BoreD 0.8135-.8145" Shaft clearance 0.0025-45" Ref# 8 Fig. 8 Page 27 #7 (1969) (Req:1) Layshaft low gear |
|
57-1370 / T1370 Bin K-4 (1/2/0) Bush BoreDia 0.8135-.8145" Clearance .0032-47" Len 2 19/32" Ref# 4 Fig. 8 Page 27 #7 (1969) (Req:1) Mainshaft high gear ¹ Bush protrusion 7/16" Before DU66247, none after) |
|
57-3988 / PT108B Bin L-6 (1/0/0) Bush Ref# 2 Fig. 8 Page 27 #7 (1969) (Req:1) Clutch rod, T.S. |
|
70- 70-0400 / E400 Bush, intermediate wheel Ref# 30 Fig. 1 Page 13 #7 (1969) (Req:1) Timing chest |
|
70-1479 / E1479 Bin - (2/0/0) Bushing, T.S. Camshafts Ref# 9 Fig. 2 Page 15 #7 (1969) (Req:2) Camshaft, Intake and Exhaust |
|
70-1511 / E1511 Bush, phosphor bronze OD.8140-.8145" BoreD.6890-.6894" Len 1.030-1.031" Ref# 9 Fig. 1 Page 13 #7 (1969) (Req:2) Con rod, small end |
|
70-1516 / E1516 Bin - (1/0/0) Bushing, Camshaft, Left Hand/D.S. Ref# 5 Fig. 2 Page 15 #7 (1969) (Req:1) Camshaft, exhaust D.S. |
|
70-2260 / E2260 Bin - (1/0/0) Bushing, Camshaft Ref# 4 Fig. 2 Page 15 #7 (1969) (Req:1) Camshaft, Intake D.S. |
|
70-5155 / E5155 Bush, flanged Ref# 19 Fig. 33 Page 73 #7 (1969) (Req:1) Tach gear housing T120R-TR6R |
|
82- 82-6042 / F6042 Bin - (4/0/0) Bush, pivot Pre-sized. Bush bore diameter: 1.4460"-1.4470" Ref# 2 Fig. 13 Page 37 #7 (1969) (Req:2) Swinging fork |
|
97- 97-1527 / H1527 Bin I-1 (1/0/0) Bush, bonded Ref# 9 Fig. 17 Page 45 #7 (1969) (Req:2) Handle bar mounting |
|
97-1616 / H1616 Bush, solid Ref# 24 Fig. 18 Page 47 #7 (1969) (Req:4) Handlebar mount T120R-TR6R ¹ For solid mount only |
|
97-1929 / H1929 Bushing Ref# 5 Fig. 33 Page 73 #7 (1969) (Req:2) Speedo/tach mounting brackets |
|
99- 99-0122 FROM I-NET 64533645 Bush, bonded Ref# 18 Fig. 13 Page 37 #7 (1969) (Req:4) Rear shock absorber |
|
EOF |